Wire replacement wireless RF controls

migro

industrial wireless controls

General Purpose Radio Control

    Performance

■ 2 Mile (3 km) line-of-sight with with 938432 or 938450 antenna
■ 1200. feet (300.m) in-building range with 0dbi antenna
■ Operation: FCC ISM band 433MHz free of interference
■ Dry isolated contact input N/O
■ Relay output SPST 10.A 240V pilot duty
■ Ready and easy to install, no setup required,
      no programming, no internet

     Application dossier      To order

	Selection
	Single (1) Channel 938091
	Two (2) Channel 938092
	Four (4) Channel 938094

Specifications Digital Transmitter

Supply power	12 VDC @ 400 mA
Inputs	N/O Normally Open, digital dry contact
Power	Transmitter per FCC Part 15.249, 50mV/m @ 3m
Transmission	Digital Encoded Gaussian_frequency-shift_keying
Channels	16 addresses per system GFSK
Connection	Open wire or Terminal screws 930084
Response	Loop 500 msec
Weight	0.8 lb (0.40kg) each unit
Dimensions	4.5"W x 5.5"H x 2.5"D (110 x 140 x 70 mm)

Antenna Sold Separately

Specifications Digital Receiver

Supply power	12 VDC @ 300 mA
Outputs	Relay SPDT 10Amp, 30VDC, 240VAC Pilot Duty Class II
Frequency	433 MHz • License free Industrial
Configuration	DIP switch factory preset
Transmission	Supervised Tx - Rx carrier
Compliance	FCC CFR part 15.247
Antenna Z	50 Ohm SMA connector
Ambient temp	14° to 140° F (-10° to 60° C)
Enclosure	NEMA1, IP22, UL94-5VA, panel mount


938433 Yagi Antenna 12 E 14 dBi 3 Mile Length: 43", Weight: 3.lb with 10 ft coax cable and connector	938432 Antenna 3 E Yagi 7 dBi 1 Mile Length: 18", Weight: 1.lb with 10 ft coax cable and connector	938438 Omni 3 dBi Antenna Length: 37", Weight: 3.lb with 10 ft coax cable and connector	938091 0 dBi Short range 7" Omni Antenna 5ft coax cable SMA